SCHONSTEDT TMS-001-SF-8 , TMS-001-SF-8 TraceMaster SF Single Frequency + Passive Pipe and Cable Locator 8 kHz Frequency, TMS-001-SF-8管线定位仪。
 
Easy To Use
The TraceMaster was designed by industry leaders with recommendations from some of the biggest names in the industry. The receiver operates with only two buttons and two knobs with minimum training.
The TraceMaster offers you more productivity in the field with our exclusive RF link. Use this link to change frequencies and monitor battery usage from the receiver without having to return to the transmitter. This design saves battery life in the transmitter by not transmitting unnecessary frequencies.
 
System Description
Select between Passive, 575 Hz, 8 kHz, 82 kHz and 455 kHz operating frequencies. The selection is automatically communicated to the transmitter via the RF link. In the Passive mode the transmitter shuts down its output and the receiver searches for 50/60 Hz signals. The signal strength readout indicates the peak sensor signal at all operating frequencies. The left and right arrows, as well as the depth measurement are also available at all frequencies, with the exception of 455 kHz, which is based on a single peak sensor. Use the 575 Hz to trace good conductors for long distances without "bleeding" to adjacent utilities. The 8 kHz provides an ideal general-purpose frequency for medium to long distances in poorer conductors, with minimal bleeding. The 82 kHz is appropriate for shorter runs on pipes, especially if it is necessary to jump non-conductive gaskets. The 455 kHz will bleed easily to adjacent utilities, thus providing an excellent "sweep mode" for checking an area with unknown targets. There is no need to carry "additional instruments".

评分：

（0名网友评分）